Mouse navigation/es

Overview

For more information about selecting objects see Selection methods.

For more information about manipulating objects see Std TransformManip.

Selecting a navigation style

Available navigation styles

With all navigation styles, unless selecting objects from a sketch in edit mode, you must hold Ctrl to select multiple objects.

The following keyboard options are available for all styles:

• Ctrl + and Ctrl + or PgUp and PgDn to zoom in and out, respectively.
• The arrow keys, , to pan the view left/right and up/down.
• Shift + and Shift + to rotate the view by 90 degrees.

The Blender navigation style was modeled after Blender.

|Shift=Shift

|Select_text=Press the left mouse button over an object you want to select.

|Zoom_text=Use the mouse wheel to zoom in and out.

|Rotate_view_text=Hold the middle mouse button, then move the pointer.

|Pan_text=Hold Shift and the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, and then move the pointer. }}

CAD navigation

Select	Zoom	Rotate view First method	Rotate view Alternate method	Pan
Press the left mouse button over an object you want to select.	Use the mouse wheel to zoom in and out. Clicking the middle mouse button re-centers the view on the location of the cursor.	Hold the middle mouse button, then press and hold the left mouse button, then move the pointer. If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled. A double click with the middle mouse button sets a new center of rotation.	Hold the middle mouse button, then press and hold the right mouse button, then move the pointer. With this method the middle mouse button may be released after the right mouse button is held pressed. Users who use the mouse with their right hand may find this method easier than the first method.	Hold the middle mouse button, then move the pointer.
	Ctrl+Shift+	Shift+		Ctrl+
	Zoom mode: hold the Ctrl and Shift keys, press the right mouse button once, then move the pointer.	Rotate mode: hold the Shift key, press the right mouse button once, then move the pointer.		Pan mode: hold the Ctrl key, press the right mouse button once, then move the pointer.

This style was tailored for use with a touchscreen and pen. Nevertheless, it can also be used with a mouse, and is recommended for use when using a Mac with a trackpad.

|Select_text=Press the left mouse button over an object you want to select.

|Zoom_text=Use the mouse wheel to zoom in and out.

|Rotate_view_text=Hold the left mouse button, then move the pointer. In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode.

To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press H on the keyboard.

|Pan_text=Hold the right mouse button, then move the pointer.

|Tilt_view_text=Hold both left and right mouse buttons, then move the pointer sideways.

|Select_gesture_text=Tap to select.

|Zoom_gesture_text=Drag two fingers (pinch) closer or farther apart.

|Rotate_view_gesture_text=Drag with one finger to rotate.

Hold Alt when in the Sketcher.

|Pan_gesture_text=Drag with two fingers.

Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button.

|Tilt_view_gesture_text=Rotate the imaginary line formed by two touch points.

This method is disabled by default. To enable, go to Edit → Preferences → Display → Navigation, and uncheck the "Disable touchscreen tilt gesture" checkbox. }}

In Maya-Gesture Navigation, panning, zooming, and rotating the view require the Alt key together with a mouse button; therefore, a three-button mouse is required. It's also possible to use gestures as this style was developed over the Gesture navigation style.

|Alt=Alt

|Select_text=Press the left mouse button over an object you want to select.

|Zoom_text=Use the mouse wheel to zoom in and out.

Alternatively, hold Alt and the right mouse button, then move the pointer.

|Rotate_view_text=Hold Alt and the left mouse button, then move the pointer.

|Pan_text=Hold Alt and the middle mouse button, then move the pointer.

|Tilt_view_text=Hold Alt and both left and right mouse buttons, and then move the pointer sideways. }}

The OpenCascade navigation style was modeled after OpenCascade.

Select	Zoom		Rotate view		Pan
		Ctrl+		Ctrl+		Ctrl+
Press the left mouse button over an object you want to select.	Use the mouse wheel to zoom in and out. Alternatively, hold Ctrl and the left mouse button, then move the pointer.		Hold the middle mouse button, then press and hold the right mouse button, then move the pointer. Alternatively, hold Ctrl and the right mouse button, then move the pointer.		Hold the middle mouse button, then move the pointer. It is possible to hold Ctrl.

OpenInventor navigation

Select	Zoom		Rotate view	Pan
Shift+
Hold Shift, then press the left mouse button over an object you want to select. Hold Ctrl instead to select multiple objects.	Use the mouse wheel to zoom in and out. Alternatively, hold the middle mouse button, then press and hold the left mouse button, then move the pointer.		Hold the left mouse button, then move the pointer.	Hold the middle mouse button, then move the pointer.

OpenSCAD navigation

The OpenSCAD navigation style was modeled after OpenSCAD.

Select	Zoom			Rotate view		Pan
			Shift+
Press the left mouse button over an object you want to select. version 0.21 and below Hold Ctrl and Shift when pressing the mouse button to drag an object in a sketch in edit mode.	Use the mouse wheel to zoom in and out. Alternatively, hold the middle mouse button, then move the pointer. Or hold Shift and the right mouse button, then move the pointer.			Hold the left mouse button, then move the pointer. Alternatively, and when a sketch is in edit mode, hold the middle mouse button, then press and hold the right mouse button, then move the pointer.		Hold the right mouse button, then move the pointer.

The Revit navigation style was modeled after Revit.

Select	Zoom	Rotate view		Pan
		Shift+
Press the left mouse button over an object you want to select.	Use the mouse wheel to zoom in and out.	Hold Shift and the middle mouse button, then move the pointer. Alternatively, hold the middle mouse button, then press and hold the right mouse button, then move the pointer.		Hold the middle mouse button, then move the pointer. Alternatively, hold both left and right mouse buttons, then move the pointer.

TinkerCAD navigation

The TinkerCAD navigation style was modeled after TinkerCAD.

Select	Zoom	Rotate view	Pan
Press the left mouse button over an object you want to select.	Use the mouse wheel to zoom in and out.	Press the right mouse button, then move the pointer.	Hold the middle mouse button, then move the pointer.

With the Touchpad navigation style, panning, zooming, and rotating the view require a modifier key together with the touchpad. This style can also be used with a mouse.

|Ctrl=Ctrl |Shift=Shift |Alt=Alt

|Select_text=Press the left mouse button over an object you want to select.

|Zoom_text=Hold Ctrl and Shift, then move the pointer.

|Rotate_view_text=Hold Alt, then move the pointer.

Alternatively, hold Shift and the left button, then move the pointer.

|Pan_text=Hold Shift, then move the pointer. }}

Soporte de Hardware